Roof Heat Proofing Pakistan

roof heat proofing pakistan

Thermal insulators are used to prevent the flow of heat. These are used to keep our homes warm inside when there are cooler temperatures outside. The most common type of thermal insulator is XPS sheets, roof heat coating, PU spray insulation, fiber glass and insulation sheets. But other forms of plastic sheets or natural materials can also be used, Roof heat Proofing Pakistan.

EPS-XPS Insulation sheets

Sandwich wall

White Coating

PU spray

Rock wool Insulation

XPS-Insulation sheets

EPS and XPS are two different Insulation sheets which are commonly used in constructional industry for thermal insulation and heat proofing in Pakistan.  Both these product have same features of thermal insulation. Polystyrene insulation sheets are produced in variety of sizes. Usually it has minimum size of one inch thickness. It has different dimensions i.e 4×4, 6×6, 8×8. Thermal conductivity depends upon thickness of sheets. Insulation sheets provide greater flexibility compatibility and thermal efficiency for all area of building equally.


XPS-EPS sheets are commonly use for roofing and below grade to insulate cement slap and foundation slap. It has light weight and high rigidity so that these panels can be installing easily on roof and walls. Insulation sheet can be placed between exposed tongue and finished ceiling or plywood roof creating a best insulated roof. This application is usually found in domestic, commercial and industrial construction.

Following brands are available for thermal insulation and heat proofing in Pakistan

Thermapore sheets

The thermopore is often used to describe expanded polystyrene (EPS) foam; however, thermopore is actually a trademarked term for closed-cell extruded polystyrene foam made for thermal insulation and craft applications.

Jambolon sheets

Jumbolon sheets with excellent results in thermal insulation, water proofing and sound proofing has been used for construction, agriculture, sports and packaging. Closed Cell Polyethylene foam is formed with innumerable cells of Polyethylene resins.

Thermocol sheets

Thermocol contains an important thermoplastic compound, called polystyrene which is obtained by the polymerization of styrene or Phenyl thane. They can be used in cavity wall, duct and floor insulation, void filling, floor raising and packaging application.

Sandwich Panels

 A sandwich panel is any structure made of three layers: a low-density core and a thin skin-layer bonded to each side. Sandwich panels are used in applications where a combination of high structural rigidity and low weight is required, Roof heat Proofing Pakistan.

 Sandwich panels are rare product in construction industry for thermal insulation of building. Each panel consist core of thermal insulation material and skinned on both sides with metal sheets. Sandwich panel are very famous and have number of benefits mainly those related to cost. These are not only heat proofed and also help to reduce the cost of construction. The cost of panel depends upon EPS sheets, size and thickness. Unicorn is best company which has been producing thermal and heat proofing material in Pakistan since 1995.

White Roof Coating

We also providing white roof coating, acrylic based material for heat proofing in Pakistan. White coating offers solar reflectance, it reflects almost all of inferred-uv rays heating the top of roof. It reflects almost 80% of sun rays sticking the coated roof. Heat comes in three forms ultraviolet and visible light and infra-red rays.

 White Roof heat proofing coating will assist to blog all three especially IR which is responsible for 60% of heat load on building roof and walls. It can be applied on roof such as RCC metal, felt asphalt, aluminum wood and rubber. Having high elongation and strong bonding. It can create excellent waterproof barrier against all type of roof and external walls.

PU spray

Spray insulation foam is a kind of foam sprayed on walls and on the roof to protect the house from heat and cold. Once it dries up it turns into solid insulation material. It keeps the roof cool and protects the building from penetration of moisture, cold air and sound. Its impressive R-value does not let the heat transfer, Roof heat Proofing Pakistan.

Rock wool Insulation

It is one of the most popular insulation materials and is cost-effective with an R-value.

Rock-wool insulation can be installed wherever you’d install fiberglass or any other type of insulation, including walls, floors, ceilings, attics and crawlspaces. However, it’s particularly well-suited for rooms along the cold north side of the house and for interior rooms in need of sound deadening, such as media rooms or music studios. Because rock wool is highly fire resistant, it’s ideal—and often code-required—for use as a fire stop between floors of a house, Roof heat Proofing Pakistan.

Area of Application


The best insulation options for buildings or homes are PU spray foam, fiberglass, EPS and XPS Sheets. Thermal insulation is one of the oldest insulation materials available on the market. It can be either installed as loose-fill on the home floor or as a blown-in material. Thermal insulation is an important technology to reduce energy consumption in buildings by preventing heat gain/loss through the building envelope. Thermal insulation is a construction material with low thermal conductivity.

Cold store

Thermal insulation is the most efficient way to maintain cold temperatures. Thermal insulators are materials resistant to the passage of energy. They are employed in the construction of cold storage installations to create a barrier that prevents the transmission of energy and maintains the interior at a suitable temperature.

Poultry Farm

Insulation in Poultry farm will help you to keep the warmth inside in winter, saving on heating costs, and in summer it will keep the heat outside, reducing heat stress and ventilation costs. Regardless of the type of poultry house, there must be some insulation. This is a requirement for open-sided houses as well as for those that are based on a controlled environment.


Fiberglass is the most commonly used thermal insulation used for homes and commercial buildings. The main reason for their popularity is the way in which they are made. The fiberglass material is made with multiple strands of glass that are weaved in a way that the complete fiberglass insulate that building against heat, thus minimize the transfer of heat across it.